Martin® Self Adjusting Skirting Maintains Effective Seal Without Maintenance
Products Used Self Adjusting Skirting HD
Product Types Used Transfer Point Solutions , Belt Sealing
Industry Mining
Customer Morton Salt Grand River, Ohio

Problem

Martin® Self Adjusting Skirting is installed on a conveyor at Morton Salt in Grand River, Ohio.
Martin® Self Adjusting Skirting is installed on a conveyor at Morton Salt in Grand River, Ohio.

Plant management was looking to upgrade skirtboard sealing systems. The existing "slab rubber" skirting was in bad repair and leaking material.

With less than two inches (51 mm) of free belt area on each side of the loading zone, the conveyor had very limited amount of space available for installation of a sealing system.

Solution

Martin® Self Adjusting Skirting is suitable for use on conveyors with as little as 1.25 inches (32mm) of space on each side of the belt.
Martin® Self Adjusting Skirting is suitable for use on conveyors with as little as 1.25 inches (32mm) of space on each side of the belt.

Martin® Self Adjusting Skirting floats on the belt, adjusting automatically to maintain an effective seal without maintenance. The skirting is supported on pressure arms between two steel plates, the rubber sealing strip rises and falls with fluctuations in belt travel to automatically maintain an effective seal.

With the lowest belt edge requirement of any commercial skirtboard sealing system, the Martin® Self Adjusting Skirting will fit on any belt. It provides an effective seal on conveyors with as little as 1.25 inches (32 mm) of free area on each side of the belt.

Given the corrosive nature of the application, the Martin Engineering proposal originally called for Martin® Self Adjusting Skirting with all stainless steel components. However, customer budget limitation required adjustment of the proposal.

To alleviate the concerns about corrosion of moving parts and budget, a hybrid version of the Martin® Self Adjusting Skirting was developed. This version uses stainless steel pins and hardware at pivot points. Other components are mild steel and painted to provide corrosion resistance similar to the conveyor’s idler frames.

Results

Martin Engineering provided “Personalized Performance” by tailoring the Martin® Self Adjusting Skirting to provide improved corrosion resistance while remaining within the customer’s budget.

Installation was simple and straight forward; installation required less time than other skirting systems. Sealing performance has improved over time, as the belt-to-rubber seal has "worn in" after installation.

The customer has indicated plans to standardize use of the Martin® Self Adjusting Skirting on all conveyors as time and budget allow. 

Resources

PDF - Printable Version of Case Study Download
Brochure - Transfer Point Solutions Download
Brochure - Martin Engineering Corporate Profile Download

View Additional Resources

We've solved your problem somewhere before!

While your problem seems unique and frustrating, with 70+ years of solving similar problems around the world, and with the most experienced and educated people on our teams, we can assure you that we’ve “Been There, Done That.” At least close enough to know what needs to be done next and adjust for your situation.

Put Us To The Test For Free! Let Us Give You a Solution.
Wait! Consider Our Free Expert Assistance For Any Technical Decisions...
9 out of 10 customers benefit from our expert advice. We highly suggest you take advantage of this Free Assistance to ensure proper product selection and consideration of all components needed to solve your problem. Use the contact options below to get started!

Contact Us!

Call Today 800-544-2947

100% Money-back Guarantee
This field is required!
This field is required!
This field is required!
This field is required!
This field is required!
This field is required!
This field is required!
This field is required!